Publicité
Other features
•
Auto-Restart(some appliance)
lf the appliance loses power, it will automatically restart with the prior settings once power has
been restored.
•
Anti-mildew (some appliances)
When turning off the appliance from COOL, AUTO (COOL), or DRY modes, the appliance will
continue operate at very low power to dry up condensed water and prevent mildew growth.
•
Wireless Control (some appliances)
Wireless control allows you to control the appliance using a mobile phone and a wireless
connection. For the USB device access, replacement, maintenance operations must be carried out by
professional staff.
•
Louver Angle Memory(some appliances)
When turning on the appliance, the louver will automatically resume its former angle.
•
Active Clean function(some appliance)
--
The Active Clean Technology washes away dust when it adheres to the heat exchanger by
automatically freezing and then rapidly thawing the frost. A "pi-pi" sound will be heard.
The Active clean operation is used to produce more condensed water to improve the
cleaning effect, and the cold air will blow out. After cleaning, the internal wind wheel then
keeps operating with hot air to blow-dry the evaporator, this keeping the inside clean.
--
When this function is turned on, the indoor unit display window appears "CL" , after 20 to
130 minutes, the appliance will turn off automatically and cancel Active Clean function.
--
For some appliances, the system will start hightemperature cleaning process, and the
temperature of air outlet is very high. Please keep away from it. And this would lead to the
rising of the room temperature.
•
Breeze Away (some appliances)
This feature avoids direct air flow blowing on the body and make you feel indulging in silky coolness.
•
Refrigerant Leakage Detection (some appliances)
The indoor unit will automatically display "ELOC "or flash LEDS (model dependent ) when it detects
refrigerant leakage.
•
Sleep Operation
The SLEEP function is used to decrease energy use while you sleep (and don't need the same
temperature settings to stay comfortable). This function can only be activated via remote control.
And the Sleep function is not available in FAN or DRY mode.
Press the SLEEP button when you are ready to go to sleep. When in COOL mode, the appliance will
increase the temperature by 1 °c (2° F) after 1 hour, and will increase an additional 1 °c (2° F) after
another hour. When in HEAT mode, the appliance will decrease the temperature by 1 °C (2° F) after
1 hour, and will decrease an additional 1 °c (2° F) after another hour. The sleep feature will stop
after 8 hours and the system will keep running with final situation.
4
152
Publicité
