Care And Maintenance - Qlima S 1709 Manuel D'utilisation

To operate the appliance manually:
1. Open the front panel of the indoor unit.
2. Locate the MANUAL CONTROL button on the right-hand side of the appliance.
3. Press the MANUAL CONTROL button one time to activate FORCED AUTO mode.
4. Press the MANUAL CONTROL button again to activate FORCED COOLING mode.
5. Press the MANUAL CONTROL button a third time to turn the appliance off.
6. Close the front panel.
Range
NOTE: Do not move louver by hand. This will cause the louver to become out of sync. lf this occurs, turn off
the appliance and unplug it for a few seconds, then restart the appliance. This will reset the louver.
CAUTION
Do not put your fingers in or near the blower and suction side of the appliance. The high-speed
fan inside the appliance may cause injury.
Deflector
rod
C

CARE AND MAINTENANCE

Cleaning Your Indoor Unit
BEFORE CLEANING OR MAINTENANCE
ALWAYS TURN OFF THE APPLIANCE'S SYSTEM AND DISCONNECT ITS POWER SUPPLY BEFORE
CLEANING OR MAINTENANCE.
4
154
Fig. A
Manual control button
Fig. B