Pit Boss MEMPHIS Instructions Et Recettes page 18

24. MOUNTING THE ASH TRAY GUIDES TO THE
BOTTOM OF THE CHARCOAL CHAMBER,
MOUNTING THE GAS DRIP TRAY GUIDES TO THE
BOTTOM OF THE GAS CHAMBER
Parts Required :
Charcoal Ash Tray Guides (#24)
2 x
2 x Gas Drip Tray Guides (#26)
2 x Main Gas and Charcoal Chamber
8 x M6x10 mm Screws (#D)
Installation :
Mount two Charcoal Ash Tray Guides (#24) to the
•
bottom of the Charcoal Chamber and mount two
Gas Drip Tray Guides (#26)
Use: 8 x M6x10 mm Screws (#D)
See Fig. 24.
25. MOUNTING THE KNOBS TO THE ASH TRAY AND
GAS GREASE TRAY
Parts Required :
Knobs (#29)
2 x
Ash Tray (#25)
1 x
1 x Gas Grease Tray (#27)
2 x M5x10 mm Screws (#B)
Installation :
• Mount the Knob (#29) to the Ash Tray (#25) and
mount the Knob (#29) to the Gas Grease Tray (#27)
Use: 2 x M5x10 mm Screws (#B).
See Fig. 25.
Note: Loosen the screws of Drip Tray Guides and
Ash Tray Guides for alignment and tighten it again
if needed.
18
Fig.24
#24
#26
Fig.25
#24
#26