Kübler Sendix 58 FS2 Instructions D'utilisation page 43

3.6.1 Sendix 58xxFSx
Mechanical characteristics for the Sendix 58xxFS
encoders
Maximum rotational speed **
Maximum angular acceleration 5x10
Operating temperature **
Ambient temperature ATEX
Protection level according to
EN 60529
Pollution degree according to
EN 61010
Installation height
Weight
Shock resistance according to
EN 60068-2-27
Vibration resistance according
to EN 60068-2-6
** Limitations, see chapter Limitations [} 62].
BA Sendix® 58xxFS2 / 58xxFS3 - R60049.0009 - 04
-1
12000 min
5
rad/s²
-40°C ... +90°C
[-40°F ... +194°F]
-20°C ... +60°C
[-4°F ... +140°F]
IP65 / IP67
2
< 2000 m [6562 ft]
appr. 0,45 kg [15.87 oz]
2
1000 m/s , 6 ms
8,7 ... 200 Hz, 30 m/s²
200 ... 2000 Hz, 200 m/s²
Encoders with cable outlet
Due to the cable material (PVC as standard), encoders with
direct cable outlet can only be used up to -30°C [-22°F]. If you
need a wider temperature range, please contact us, see
chapter Contact [} 64].
Electrical data for the Sendix 58xxFS encoders
Supply voltage
Supply voltage according to
UL 1310
Current consumption (no load)
5 V DC
10 ... 30 V DC
Protection class according to
EN 61140
Smallest safe measuring step
NOTICE
5 V DC, ± 10 %
10 ... 30 V DC
Class 2
max. 80 mA
max. 50 mA
III (PELV)
10 % of a
SinCos period
EN - 43