Safety Inspection Checklist - Invacare Birdie Manuel D'utilisation

Invacare®Birdie™

7.1.1 Safety inspection checklist

A person who is suitably and properly qualified and well acquainted
with the design, use and care of the lift should perform periodic
inspections.
Date of Inspection:
THE CASTER BASE
q
Inspect for missing hardware.
q
Base opens/closes with ease.
q
Inspect casters and axle bolts for tightness.
q
Inspect casters for smooth swivel and roll.
q
Inspect and clear wheels of debris.
q
Inspect pivot joints for wear.
SLINGS AND HARDWARE
q
Check all sling attachments each time it is used to ensure
proper connection and patient safety.
q
Inspect sling material for wear.
q
Inspect straps for wear.
q
Inspect stitching.
THE ELECTRIC ACTUATOR ASSEMBLY
q
Check for leakage.
q
Inspect hardware on mast, boom and base.
q
Check for wear or deterioration. If damaged, return to
factory.
q
Cycle to ensure smooth quiet operation of the electric
actuator.
36
Initials:
THE BOOM
q
Check all hardware and hanger bar supports.
q
Inspect for bends or deflections.
q
Inspect bolted joints of boom for wear.
q
Inspect to ensure that the boom is centered between the
base legs.
q
Check the mast pivot bolt. Ensure that the bolt is tightly
secured.
q
Inspect pivot joints for wear.
q
Check if safe working load is visibly marked on the boom
THE MAST
q
Mast must be securely assembled to boom.
q
Inspect for bends or deflections.
q
Inspect pivot joints for wear.
THE HANGER BAR
q
Check the bolt/hooks for wear or damage.
q
Check sling hooks for wear or deflection.
q
Inspect pivot joints for wear.
q
Check the carabiner for wear at contact points.
q
Check the welded pin that is carrying the carabiner at the
boom.
q
Check if safe working load is visibly marked on the hanger bar
CLEANING
q
Whenever necessary.
1575480-B