Setup; Safe Assembly; Assembling The Mast To The Base - Invacare Birdie Manuel D'utilisation

4 Setup

4.1 Safe Assembly

WARNING!
Risk of Injury
Improper assembly may cause injury or damage.
– Assembly MUST be performed only by qualified
personnel.
– Use only Invacare parts in the assembly of this patient
lift. The base legs, the mast, boom, pump assembly
and the hanger bar are manufactured to specifications
that assure correct alignment of all parts for safe
functional operation.
– DO NOT overtighten the mounting hardware. This
will damage the mounting bracket.
There are no tools required to assemble the patient lift.
If there are any issues or questions during assembly, contact
a local Invacare representative. Refer to the contact
information on the last page in this manual.
1575480-B

4.2 Assembling the Mast to the Base

WARNING!
– The mast may be folded for storage or transporting.
Each time the mast is folded, the mast MUST be
properly secured to the base assembly.
– Check all parts for visible defects or damage before
assembly. In case of any damage, do not use the
product and contact Invacare®.
– Make sure the emergency stop is activated before
assembly or disassembly.
– Take care when lifting components during assembly.
Some parts are heavy. Always remember to adopt
the correct lifting position.
Perform unpacking and assembly operation at floor level.
Setup
13