Abus TERXON M Instructions D'installation page 174

2
UK
4. Confirm your input. On the control unit, enter:
164 User reset after confirmed alarm
To change the settings:
1. On the control unit, enter:
2. The LCD display shows: 164:Alarm RstU/E
3. Via the keypad, select from the following items and
press:
0
1
2
4. Confirm your input. On the control unit, enter:
170 Prog. pulse outputs (time active)
The outputs programmed as active 1–4 are pulse-addressed
for a predefined time during activation of the alarm centre as
well as for fire and panic alarms. First define the time in which
these output are to be active.
1. On the control unit, enter:
2. The LCD display shows: 170: Set 1 01
3. Via the keypad, enter the time duration. Possible
values: are 00 for a latched output or a time
duration from 01 to 12 seconds.
4. To confirm, press:
A zone must be entered for a confirmed
alarm
Conf Ent 2
Two zones must be entered for a
confirmed alarm
164
Alarm RstU/E
The user can make a reset after the first
alarm / installer is required for reset after
confirmed alarm
Alarm RstU/U
The user can make a reset after both types
of alarm
Alarm RstE/E
The installer can make a reset after both
types of alarm
170
5. The LCD display shows: 170: Set 2 01
6. In the same way, enter pulse time 2 via the keypad.
7. Continue until all times are entered.
8. The control unit acknowledges your input with a
.
double "beep" tone and shows Installer mode.
171 Prog. pulse outputs (levels active)
Define when the outputs are to activated by defining the type
of activation/deactivation (A, B, C, D) for switching the
outputs to active.
1. On the control unit, enter:
2. The LCD display shows: 171: Set 1 ABCD
3. Via the keypad, enter the activation level. A = overall
active, B, C and D for internal active B, C or D.
4. To confirm, press:
5. The LCD display shows: 170: Set 2 ABCD
6. In the same way, enter activation level 2 via the
keypad.
7. Continue until all levels are entered.
8. The control unit acknowledges your input with a
double "beep" tone and shows Installer Mode.
.
78
171