Publicité
Les langues disponibles
Les langues disponibles
041 Siren delay
Proceed as follows to change the property of the siren delay:
1. On the control unit, enter:
2. The LCD display shows: 041:Bell Dly=0
3. Via the keypad, select from the following items and
press:
Bell Dly=0
After an alarm is triggered, a local alarm
0
is started without delay.
Bell Dly=1.5
After an alarm is triggered, a local alarm
1
is activated after a delay of 1.5 minutes.
Bell Dly=3
After an alarm is triggered, a local alarm
2
is activated after a delay of 3 minutes.
Bell Dly=5
After an alarm is triggered, a local alarm
3
is activated after a delay of 5 minutes.
Bell Dly=10
After an alarm is triggered, a local alarm
4
is activated after a delay of 10 minutes.
Bell Dly=15
After an alarm is triggered, a local alarm
5
is activated after a delay of 15 minutes.
Bell Dly=20
After an alarm is triggered, a local alarm
6
is activated after a delay of 20 minutes.
4. Confirm your input. On the control unit, enter:
5. The control unit acknowledges your input with a
double "beep" tone and shows Installer Mode.
041
.
53
042 Siren duration
To change the property of the siren duration:
1. On the control unit, enter:
2. The LCD display shows: 042:Bell On=20
3. Via the keypad, select from the following items and
press:
Bell On=1.5
If an alarm is triggered, the local alarm is
1
activated for 1.5 minutes.
Bell On =3
If an alarm is triggered, the local alarm is
2
activated for 3 minutes.
Bell On =5
If an alarm is triggered, the local alarm is
3
activated for 5 minutes.
Bell On =10
If an alarm is triggered, the local alarm is
4
activated for 10 minutes.
Bell On =15
If an alarm is triggered, the local alarm is
5
activated for 15 minutes.
Bell On =20
If an alarm is triggered, the local alarm is
6
activated for 20 minutes.
4. Confirm your input. On the control unit, enter:
5. The control unit acknowledges your input with a
double "beep" tone and shows Installer Mode.
042
.
UK
Publicité
