Abus TERXON M Instructions D'installation page 151

047 Partition A alarm Reaction
To change this feature, proceed as follows:
1. On the control unit, enter:
2. The LCD display shows: 047:A=Keypad
3. Via the keypad, select from the following items and
press:
A = Keypad
0
Control unit alarm
A = Local
1
Control unit + loudspeaker
A = Full
Control unit + loudspeaker + dial
2
module
4. Confirm your input. On the control unit, enter:
5. The control unit acknowledges your input with a
double "beep" tone and shows Installer Mode.
048 Control unit lock
If you want to allow the user to deactivate the system using a
proximity chip key then the control unit must be locked (UF,
FE, MD, code entry, false alarm cancellation, inactive on
alarm once more active). To change the property of the
control unit lock, proceed as follows:
1. On the control unit, enter:
2. The LCD display shows: 048: Code Lk OFF
3. Via the keypad, select from the following items and
press:
Code Lk OFF
The system allows all users to use all
0
control units during the entry.
Code Lk ON
During entry, the system locks access to
1
the control units from all users.
4. Confirm your input. On the control unit, enter:
047
.
048
.
55
5. The control unit acknowledges your input with a
double "beep" tone and shows Installer Mode.
050 CSID code
To be able to use the remote reset function, you must set the
alarm centres to installer reset (function 33 to 1) and assign
the CSID code. To change the CSID code for a deactivated
alarm centre:
1. On the control unit, enter:
2. The LCD display shows: 050: CSID
3. Via the keypad, enter the code. Enter 0 0 0 0 to delete
the code.
4. Confirm your input. On the control unit, enter:
5. The control unit acknowledges your input with a
double "beep" tone and shows Installer Mode.
051 Date and time
Proceed as follows to change the date and time:
1. On the control unit, enter:
2. The LCD display can show: 051: D03 M02 Y05
3. Via the keypad, select from the following items and
enter the date:
4. Confirm your input with
5. Enter the month via the keypad. (January to
September = 01 to 09)
6. Confirm your input with
7. Enter the year via the keypad.
8. Confirm your input with
9. The display changes; now enter the hour via the
keypad.
10. Confirm your input with
11. Enter the minute via the keypad.
050
_
.
051
.
.
.
.
UK