Abus TERXON M Instructions D'installation page 157

Lock Toggled
The door lock controlled by the
1
Forbikobler system is open during the
reset.
4. Confirm your input. On the control unit, enter:
5. The control unit acknowledges your input with a
double "beep" tone and shows Installer Mode.
070 Entry/exit behaviour on internal active (C)
To change the zone property of the entry/exit zone at internal
active (C):
1. On the control unit, enter:
2. The LCD display shows: 070: C=FE = FE
3. Via the keypad, select from the following items and
press:
C=FE = FE
A zone programmed as entry/exit keeps
this property even for internal activation
0
and thus starts the entry delay time when
the zone triggers and during active
internal activation.
C=FE = NA
A zone programmed as entry/exit changes
its zone property during internal activation
1
to immediate and triggers an alarm if the
zone triggers and during active internal
activation.
4. Confirm your input. On the control unit, enter:
5. The control unit acknowledges your input with a
double "beep" tone and shows Installer Mode.
.
070
.
61
071 Entry to follow behaviour on internal
active (C)
To change the zone property of the entry to follow zone at
internal active (C):
1. On the control unit, enter:
2. The LCD display shows: 071: C=ER =ER
3. Via the keypad, select from the following items and
press:
C=ER =ER
A zone programmed as entry to follow
keeps this property even during internal
0
activation and permits entry to this zone
during the entry delay period.
C=FE = FE
A zone programmed as entry to follow
changes its zone property during internal
1
activation to entry/exit and starts the delay
time if the zone triggers and during active
internal activation.
4. Confirm your input. On the control unit, enter:
5. The control unit acknowledges your input with a
double "beep" tone and shows Installer Mode.
071
.
UK