Publicité
Les langues disponibles
Les langues disponibles
C.8 ATTACH THE PEDALS
WARNING!
Attachment of an incorrect pedal into a crank arm can strip
pedal threads and cause irreparable damage. Visually match the
R and L stickers on the pedal and crank arm before attaching the
pedals. Before your first ride, please check to ensure your pedals
are attached correctly.
It is very important that you check the crank set for correct
adjustment and tightness before riding your bicycle.
❶ Match the pedal marked R with the right-hand crank arm and
match the pedal marked L with the left-hand crank arm.
Figure 3.19
❷ Place the threaded pedal into the hole on the crank arm.
❸ By hand, slowly turn the spindle the correct direction.
Clockwise for right side pedal, counterclockwise for left side
pedal. Important! Stop if you feel resistance! This may be
an indication the spindle is entering the hole at an angle.
Remove the spindle and repeat step two.
❹ If the spindle is entering the hole cleanly then use a 15 mm
wrench or pliers to tighten completely.
❺ Tighten the crank axle nuts using an appropriate wrench.
3
1
1
The left pedal turns
counter-clockwise and the
right pedal turns clockwise.
3
ASSEMBLY C
2
5
2
Figure 3.19
35
Publicité
