Ascend Alafia Mode D'emploi page 32

C.5 ATTACH THE BRAKE CABLES
WARNING!
Failure to properly set the brakes may result in the inability to
stop the tricycle movement and cause serious injury or death.
Be sure the brakes are functioning properly before using the
bicycle.
Follow these steps if the brake cables are not attached to the
brake levers:
❶ Rotate the cable adjustment barrel and cable nut until the
slots are aligned with the slot on the brake lever body.
Figure 3.6
❷ Press the brake lever towards the grip.
❸ Insert cable head into the brake lever then rotate making sure
cable goes through the slots. Figure 3.7
❹ Release the brake lever. Figure 3.8
❺ Lightly pull on the cable and rotate the cable nut and cable
barrel so they are no longer aligned.
Cable adjustment
barrel slot Cable nut slot
1
Brake cable slot
3
Brake cable
5
ASSEMBLY C
2
Brake lever
Figure 3.6
Cable head
Figure 3.7
4
Figure 3.8
27