Publicité
Les langues disponibles
Les langues disponibles
WARNING!
If your seat post is not inserted in the seat tube as described in
figure 1.4, the seat post, binder or even frame may break, which
could cause you to lose control and fall.
Ask your dealer to set the saddle for your optimal riding position
and to show you how to make this adjustment. If you choose to
make your own saddle height adjustment: Figure 1.4
❶ loosen the seat post clamp
❷ raise or lower the seat post in the seat tube
❸ make sure the saddle is straight fore and aft
❹ re-tighten the seat post clamp to the recommended torque
(Appendix F.3 or the manufacturer's instructions).
Once the saddle is at the correct height, make sure that the seat
post does not project from the frame beyond its Minimum
Insertion or Maximum Extension mark. Figure 1.5
NOTE: Some bicycles have a sight hole in the seat tube, the
purpose of which is to make it easy to see whether the seat post is
inserted in the seat tube far enough to be safe. If your bicycle has
such a sight hole, use it instead of the Minimum Insertion or
Maximum Extension mark to make sure the seat post is inserted in
the seat tube far enough to be visible through the sight hole.
2
Seat post
Minimum insertion
marks on the seat post
Adjustment nut
Quick-release lever
3
SAFETY A
Quick-release
seat clamp
1
Seat tube
Figure 1.4
Minimum
insertion
marks
Figure 1.5
15
Publicité
