Bluetooth Connection; Object Mode - Kettler PREMIUM COMPUTER Notice D'utilisation

BlUETOOTh CONNECTION

For the connection with chest strap, tablet or PC.
Establish connection to the chest strap
You can couple the KETTlER training computer with a Bluetooth ready chest strap for heart rate
monitoring. The connection is established in start menu > Device settings > Bluetooth menu. The
Bluetooth function must be activated in the first line of the Bluetooth menu. In addition, select
'Chest strap' in the line below as active mode. In the third line, you can select and couple the
chest strap. When selecting this line, you will enter a list with already connected and available
chest straps. available chest straps are highlighted in blue. here, you need to select the desired
chest strap and connect it in the following context menu. If several users with different chest straps
are training on the training equipment, the applicable chest strap must always be activated with
the procedure described above.
Note: The training equipment can only be connected with Bluetooth ready chest straps. When
selecting a chest strap, make sure that it supports the Bluetooth Low Energy or the Bluetooth
Smart Standard. Chest straps with 5kHz technology (e.g. polar T34) cannot be connected.
Establish a connection with smartphone, tablet or computer
The KETTlER fitness equipment can be connected via Bluetooth to smartphones, tablets, or PC's en-
hancing the training experience with diverse aPP's or the PC software KETTlER WORlD TOURs.
The connection is established in start menu > Device settings > Bluetooth menu. The Bluetooth
function must be activated in the first line of the Bluetooth menu. In addition, select 'aPP / PC' in
the line below as active mode. In the third line, the device name of your KETTlER fitness equip-
ment will appear. When selecting the name, you can edit it. any further coupling will be done
in the Bluetooth menu of the device to be coupled. If a smartphone, tablet or PC is coupled, the
training screen of the device is displayed with reduced functionality.

OBJECT MODE

Customized software version for the use in public gyms.
If you want to place the Kettler fitness equipment in a publicly accessible gym, we recommend to
activate the object mode. This reduces the functionality and the training modes to all types which
make sense when using the equipment once (e.g. as hotel guest). In addition, setting menus are
disabled so that nothing can be changed. In the object mode, no personal data and training
results can be saved.
Enable the object mode in the start menu in Device settings. You are required to press all three
buttons at once. By pressing the same button sequence, you will return to normal mode, if
required.
FURThER FUNCTIONs
ENGlIsh 21
| KETTLER