Taking Out Of Service And Disposal; Technical Specifications - ASO Safety Solutions ISK 74 Manuel D'utilisation

ISK 74 Inductive Safety Relay 74 Inductive Safety Relay Inductive Safety Relay

12. Taking out of service and disposal

The products manufactured b�� ASO are intended solel�� for commercial use (B2B). At the end of use,
the products are to be disposed of according to all local, regional and national regulations. Products
can also be returned to ASO, which will then dispose of them properl��.
13. Technical specifications
Supply voltage
Mains voltage:
Low voltage:
Power consumption
Certifications
Categor�� 3 acc. to EN 954-1
Safet�� device acc. to EN 12978
Terminal resistance of the SCEs
nominal value
upper switching point
lower switching point
Relay stages
Max. switching voltage
Max. switching current
Mechanical life-time
Safety relay switching times
Response time
Turn-off time
Version ISK 74-30
Dimensions (HxWxD)
PCB
Weight
Version ISK 74-31
Housing
Dimensions (HxWxD)
Housing
Housing incl. screw conn. 140 x 122 x 56 mm
Protection class
IP65 with M16 screw fittings
IP54 with M16 blanking plug
Weight
Version ISK 74-33
Dimensions (HxWxD)
Housing
Weight
Temperature range
Connection cable cross-section
single- or fine-stranded cable 0,75-1,5 mm
All voltages connected to the switching unit must be
safely isolated!
20
Relay
U 230 V AC 50/60 Hz
Mains
U 24 V AC/DC ±10 % 24 V AC/DC
E
P 3 VA
max
R = 8,2 kΩ
nom
R > 20 kΩ
AO
R < 2,5 kΩ
AU
240 V ~ / 30 V -
4 A ~ / 4 A -
>10 actuations
6
< 20 ms
500 ms
113 x 100 x mm
285 g
Pol��st��rene with transparent cover
120 x 122 x 56 mm
650 g
122 x 103 x 18 mm
295 g
-20°C to +55°C
2
Version ISK 74-30
Version ISK 74-31
Version ISK 74-33
Certificate no.
78/780/551696
Test report no.
04/YTT/551696