Taking Out Of Service And Disposal; Technical Specifications - ASO Safety Solutions ELMON rail 32-332 Manuel D'utilisation

ELMON rail 32-332
Safety Relais

11. Taking out of service and disposal

The products manufactured by ASO are intended solely for commercial use (B2B). At the end of use, the
products are to be disposed of according to all local, regional and national regulations. Products can also be
returned to ASO, which will then dispose of them properly.

12. Technical specifications

Supply voltage
Mains voltage:
Low voltage:
Terminal resistance oft the sensor
nominal value
upper switching point R
lower switching point R
Relay stages
Nominal current DC
Nominal current AC
Mechanical life-time
Safety relay switching times
Switching off delay
(response time)
Turn-off time
Mounting
Dimensions (HxWxD)
Dimesnions incl. holder
Protection class
Weight
Temperature range
Connection cable cross-section
single- or fine-stranded cable 0,75-1,5 mm
Certifications (In accordance with INDUS classic 74-312)
Electronics
Electromechanics
All voltages connected to the switching unit
must be safely isolated!
U 230 V AC 50/60 Hz
Netz
P = 3 VA
max
U 24 V AC/DC ±10 %
E
I = 85 mA; I = 180mA (100ms)
E max
R = 8,2 kΩ
nom
> 12 kΩ
AO
< 5 kΩ
AU
3 A (30 V DC)
3 A (30 V AC)
>10 actuations
6
< 10 ms
500 ms
Snap-on-rail version for
mounting on 35-mm DIN rails
in the switching box
87 x 100 x 42 mm
87 x 100 x 62 mm
IP00
260 g
-20°C to +55°C
2
EN ISO 13849-1:2008
Category 3 PL e
MTTFd 170 years, DC 91%
MTTFd 1616 years, DC 99 %
B10d 1000000
MTTFd 190 years (Nop 52560)
EC type-examination no.:
44 205 12 399386
Certificate no.:
44 780 12 399386
Test report no.:
12 205 399386-000
19