System Components Fitted To The Gate; Device Overview; Signal Indicators; Connection Terminals - ASO Safety Solutions ISK 74 Manuel D'utilisation

ISK 74 Inductive Safety Relay 74 Inductive Safety Relay Inductive Safety Relay
6. System components fitted to the gate
1
stationary
opening closing 1 2
2 2 2
Example of use
The actual arrangement of the individual
components depends on the design of the
gate in question and the conditions at the
installation site.

7. Device overview

7.1 Signal indicators

LED Power
Suppl�� voltage
LED Transmit Opening
Fault, opening movement - travelling edge(s)
LED Stationary Opening red
Fault, opening movement stationar�� edge(s)
LED Transmit Closing
Fault, closing movement - travelling edge(s)
LED Stationary Closing
Fault, closing movement - stationar�� edge(s)

7.2 Connection terminals

STOP Opening terminals
STOP Closing terminals
STATIONARY Opening terminals
STATIONARY Closing terminals
Transmit 1, 2 terminals
24 V AC/DC terminals
PE L1 N terminals
16
Relay
2
green
red
red
red
rela�� output for controller - stop opening
rela�� output for controller - stop closing
safet�� contact edges - leading pillar opening
safet�� contact edges - leading pillar closing
stationar�� coil core
24 V AC/DC suppl�� voltage
230 V suppl�� voltage
4 3
1 ISK 74 control device
2 Stationar�� coil core
3 Travelling coil core
4 Steel cable acting as transmission medium
Stationary Opening
Transit Opening
Stationary Closing
Transit Closing
STOP STOP STATIONARY 1 2
Opening Closing Opening Closing TRANSMIT
Power
3 24V AC/DC PE L1 N