ATIKA KGSZ 250 N Notice Originale page 16

Contents
Declaration of conformity
Extent of delivery
Description of device / Spare parts
Symbols machine /operating instructions
Characteristics noise values
Vibrations
Normal intended use
Residual risks
Security instructions
Preparing for commissioning
Commissioning
Adjusting the saw
Working with the saw
Maintenance and cleaning
Transport
Storage
Possible faults
Technical data
Guarantee
Extent of delivery
• Pull, crosscut and mitre saw KGSZ 250 N (preassembled
unit)
• 2 support arms
• 1 vice assembly
• 1 dust bag
• 1 set carbon brushes
• Tool
• Operating manual
• Assembly and operating instruction sheet
After unpacking, check the contents of the box
That it is complete
Check for possible transport damage
Report any damage or missing items to your dealer, supplier or
the manufacturer immediately. Complaints made at a later date
will not be acknowledged.
Description of device / Spare parts
Pos. Order-no. Designation
1 Handle with On/Off switch
1A On/Off switch
1B Laser switch
1C Locking button
2 Carrying handle
3 Motor
4 363966 Carbon brush cover
5 Transport locking pin
All manuals and user guides at all-guides.com
1
15
21
15 / 16
16
16
16
17
17
19
19
20
21
22
23
23
23
24
24
Symbols machine
15
6 Set screw for the pulling device
7 363960 Locking lever for the rotary table adjustment
7A Locking lever
8 Rotary table
9 363961 Table insert
10 Indicator for mitre angle
11 363957 Work piece stop
12 Set screw for work piece stop
13 Laser head
14 Locking screw for the laser
15 Protective cover
16 Pendulum cover
16A Holder for the pendulum cover
17 Lock for pendulum cover
18 363959 Support arm
19 363958 Wing screw for support arm
20 Vice assembly
21 363956 Wing nut for vice assembly
22 Star grip
23 363984 Dust bag
24 Exhaust neck
25 Incline angle locking knob
26 Scale for incline angle
27 Indicator for incline angle
28 Set screw for 90° saw head incline
29 Locking nut for set screw (90°)
30 Set screw for 45° saw head position
31 Locking nut for set screw (45°)
32 Set screw for the saw blade position
33 Locking nut for set screw (saw blade
position)
34 363982 Hexagonal screw for saw blade mounting
35 363981
Front saw blade flange
36 363980
Saw blade (Ø 250 x 30 x 3.2 x 36T)
37 363979
Rear saw blade flange
38 Saw blade locking device
39 Montage-holes
40 363965
Carbon brush
41 Installation wrench
42 363954 Warning label 1
43 363955 Warning label 2
44 363953 Safety label
Carefully read
operator's manual
before handling the
machine. Observe
instructions and safety
rules when operating.
Attention! Laser radiation. Do not look into the beam.
Shut off engine
and remove
power cord
before
performing
cleaning,
maintenance or
repair work.