Télécharger Imprimer la page

Eurosystems MLT 03 Manuel D'utilisation page 32

Motoculteur

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 40
No fuel; top up.
Check that the throttle is set to START.
Check that the spark plug cap is properly inserted.
The motor does not
start
Check the conditions of the spark plug and clean or replace if necessary.
Check that the fuel cock is open (only for motor models for which the cock is
provided).
Air filter dirty, clean it.
Motor power
Check if any stone or soil/vegetation residue is stopping the tool rotation, in case
decreases
remove them.
Wheels are not
Check the transmission cables.
turning
Contact the nearest authorised service centre if the problem cannot be solved.
14. ADDITIONAL INSTRUCTIONS
14.1 DISPOSAL
At the end of its life cycle, the product
must be disposed of in accordance with
the regulations in force for Differentiated
waste disposal and cannot be treated as
simple urban waste.
The product must be disposed of at ded-
icated collection points or must be re-
turned to the dealer if you wish to replace
the product with another new equivalent
product.
The product is composed of non-biode-
gradable parts and substances that can
pollute the surrounding environment if not
properly disposed of. In addition, some of
these materials can be recycled to avoid
environmental pollution. It is everyone's
duty to contribute to the health of the
environment.
When present, the symbol
the electrical and electronic equipment
that must be disposed of separately as
prescribed by standards 2002/95/EC,
2002/96/EC and 2003/108/EC.
Do not dispose of this equipment in un-
sorted municipal waste, but take it to ap-
propriate separate collection areas.
Ask your local authorities for information
about waste disposal areas.
Anyone who does not dispose of the prod-
uct in accordance with this paragraph is
responsible for it in accordance with the
regulations in force.
13. TROUBLESHOOTING
Possible cause
14.2 DECOMMISSIONING
AND DISMANTLING
The decommissioning and dismantling of
the Machine and/or the interchangeable
equipment covered by this user's manual
consists in the disassembly of the product
by authorised personnel in compliance
with the provisions of Legislative Decree
81/08 (use of PPE, etc.) and the subse-
quent sorting and disposal as reported
in the "DISPOSAL" paragraph of this Use
and maintenance manual.
identifies
See chapt.
7.2
7.3
Specific motor
manual
Specific motor
manual
Specific motor
manual
Specific motor
manual
10.1

Publicité

loading