Publicité
Les langues disponibles
Les langues disponibles
User's Manual
Selecting Cameras
Select the Camera button
in the Main Menu, and the camera number buttons will appear. Select each
camera number button that you want to view the live video. In the quad screen mode, you also can select
the camera by touching the PDA screen.
• Monitoring Screen: Displays the live video of the selected camera. The gray screen appears if the
selected camera doesn't have any signal.
• Camera OSD: Displays the camera OSD information (camera number, date and time). 'No Video' will be
displayed when there is no signal.
• Camera Number Buttons: Show the available number of buttons according to the remote systems.
• Camera Selection Scroll Bar: Displayed only when more than 16 cameras are installed.
Selecting Screen Mode
Click the Screen Mode button
in the Main Menu, and select the screen mode you want to display. Single,
quad and full screens are available.
NOTE: In the quad screen mode, a blue line shows up around the selected camera video. The camera
information of that camera is also displayed in the camera OSD field. You can change the screen mode to
single or full screen by touching the camera image on the PDA screen.
NOTE: In the full screen mode, the image will be displayed vertically as shown below because the screen size
is 240x320. PTZ control using arrow buttons and zoom control using volume buttons (Volume +: Zoom In,
Volume -: Zoom Out) on PDA are available in the full screen mode.
Full
Screen
Quad Screen
106
Publicité
