Capture CPT-DVR4132XP Manuel D'utilisation page 179

User's Manual
2.11 Check the Allow older MS-CHAP version for Windows 95 servers box, and click the OK button.
2.12 Move to the Networking tab, and select PPP: Windows 95/98/NT4/2000 Internet for the dial-up server
type. Then, check the Internet Protocol (TCP/IP) box, and click the Properties button.
2.13 Click the Use the following IP address radio box, and enter the independent IP address starting from
"10.10.10.20". Then, click the OK button.
NOTE: The same callback IP address entered above should be entered during Remote Monitoring setup on
the BASE system. The independent IP address used to identify the DVR system is needed to set up the various
dial-up networking for the POST systems.
72