Publicité
Les langues disponibles
Les langues disponibles
•
Save Current Image: Saves the current image as a bitmap or JPEG file to the local hard disk drive or
floppy disk.
NOTE: When you save the current image as a bitmap file (*.bmp file format only) the watermark will be
included on the image, so you can check whether the saved image has been forged using the
SmartWatermark (watermark viewer program).
•
Save As Video File: Saves any video clip as an AVI file.
•
Save As MiniBank File: Saves any video clip as an ".exe" file.
•
Run CD Burner: Saves the recorded data on the CD-R or CD-RW drive using the CD burning program.
NOTE: CD burning might not be successful if the SmartGuard is recording video during CD burning. Please
stop recording for safe CD burning.
NOTE: The image and video clip can be saved only under the "C:\IDR-Series\Temp" directory or on the
removable disk including floppy disk and CD-RW.
Save Current Image
1.
Click the Save Current Image radio button in the Save Type dialog box, and click the OK button.
2.
Move to Save in, and select the save location from the drop-down list.
3.
Move to File name, and enter the file name using either the actual keyboard or the virtual keyboard.
4.
Move to Save as type, and select the file format from the drop-down list. The available formats are
bitmap and JPEG files.
5.
Click the Save button to save the current image. Selecting Cancel cancels the saving operation and
closes the dialog box without saving the settings.
NOTE: If you want to delete the file or folder, select the target file or folder then click the Delete button. You
can delete the file or folder only saved under the "C:\IDR-Series\Temp" directory.
Save As Video File
1.
Click the Save As Video File radio button in the Save Type dialog box, and click the OK button.
16-Channel Digital Video Recorder
37
Publicité
