Télécharger Imprimer la page

Capture CPT-DVR4132XP Manuel D'utilisation page 126

Publicité

Les langues disponibles

Les langues disponibles

Click the Set up zone... button, and a zone setup window appears.
The setup screen is made up of a 30x40 grid. First, click the Draw radio button and select a tool to use from
the drop-down list, and then set up the detection zone on the image. See the Setting Up the Motion
Detection for setting up the detection zone.
Move to Sensitivity, and set the anti-terrorism sensitivity (1 to 5) by holding down and dragging the pointer.
NOTE: The higher the number, the more sensitive it is.
5.
Move to Min. size, and set the minimum number of blocks (1 to 100). If you set the Min. size value to 10,
the DVR will only react when it detects changes in at least 10 connected blocks within the selected zone
established in step 6.
6.
Move to Activation times, and set the dwell time to detect changes on the image from 0 to 30 minutes.
The DVR will detect the change only when the change lasts over the preset dwell time.
7.
Move to Reference Image, and check the box to see Reference Image.
8.
Move to Current Image, and check the box to see the current image.
9.
Move to Get Reference, and select the box to set the current image as the reference image.
10.
Move to View Result, and check the box to see anti-terrorism setting results. You can check that
sensitivity and minimum size are set correctly using this feature. You can save your changes by clicking
the OK button. Selecting Cancel exits the dialog box without saving the changes.
11.
Move to Show results, and check the box to show anti-terrorism results on the monitoring image.
12.
Move to Camera association, and click the camera icon to associate it with the camera selected step 1.
If the change on the preset spot of the image is detected by one camera, other cameras can be
associated with it so that video will also be recorded from the associated cameras.
13.
Move to Alarm association, and click the alarm icon to associate it with a selected sensor. The alarm will
go off when an associated sensor is activated.
NOTE: Frequent changes of illumination might cause improper operation of anti-terrorism.
illumination will be preferred for the optimization of anti-terrorism function.
16-Channel Digital Video Recorder
Constant
19

Publicité

loading