Capture CPT-DVR4132XP Manuel D'utilisation page 163

User's Manual
Move to Remote tab.
1.
Click the Add button, and register the remote site. Up to 256 sites can be registered.
2.
Click the text field beside Site ID, and enter the site name to register using either the actual keyboard or
the virtual keyboard.
3.
Click the text field beside Network address, and enter the IP address of the remote DVR, acquired from
your network administrator. Move to Use modem, and check the box when using a modem for remote
access, and then select the operating system on the remote system; either Windows 98 or Windows XP.
For the remote connection via a modem, the dial-up networking must be installed on the remote DVR
and the Phone number and Dial-up callback IP should be entered. See Appendix 4 – Network Setup
(Modem) for setting up the dial-up networking.
NOTE: When using the DVRNS server, check the Use DVRNS box, and then enter the site name to register in
the Site ID field and the DVR name of the remote site in the Network address field. The DVR name you enter
should match the DVR name set during the Remote Monitoring setup on the remote DVR.
NOTE: he same IP address entered during the dial-up callback setup on the POST system should be entered
on the BASE system. The independent IP address starting from 10.10.10.20 will be used to identify the remote
DVR systems.
56