Capture CPT-DVR4132XP Manuel D'utilisation page 180

16-Channel Digital Video Recorder
Dial-up Networking Setup for Windows 98 BASE System
1. Dial-up Networking Setup for Remote Access
1.1 In the Windows mode, go to Start on the Task Bar, to Programs, to Accessories, and to Communications.
If Dial-up Networking is listed, go to step 1.2.
NOTE: If Dial-up Networking is not listed, go to Start on the Task Bar, to Control Panel, to Add/Remove
Programs and to Windows Setup. Check the Communications box and then click the Details... button
below. In the Communications dialog box, check the Dial-Up Networking box and the Dial-Up Server box,
and then click the OK button. Follow the Windows instructions for installing the necessary software. You can
save your changes by clicking the OK button. Selecting Cancel exits the dialog box without saving the
changes.
1.2 In the Windows mode, go to Start on the Task Bar, to Control Panel, and to Network.
1.3 Under the Configuration tab in the Network dialog box, move to Primary Network Logon and select
Windows Logon from the drop-down list. Then, click the Add... button to set up the adapter and protocol.
1.4 Click Adaptor and then click the Add... button.
1.5 Click Microsoft from the Manufacturers and Dial-Up Adaptor for the Network Adaptors. Click the OK
button to save the changes and return to the previous dialog box.
73