Télécharger Imprimer la page

Capture CPT-DVR4132XP Manuel D'utilisation page 158

Publicité

Les langues disponibles

Les langues disponibles

16-Channel Digital Video Recorder
Chapter 3 — Remote Access
You can view video or control the DVR remotely via modem or LAN. For remote access, we provide the
SmartBase program. It has three major functions; remote monitoring, remote playback and remote control.
Remote monitoring makes it possible to do real-time monitoring remotely, and remote playback makes it
possible to play recorded video from the DVR remotely. Remote control allows controlling the DVR remotely
including changing the setup.
NOTE: A BASE system can view live video or review recorded video on POST systems. The POST system can
only review recorded video on other POST systems when they are networked via LAN.
Installation
At least one POST DVR and a system for BASE are needed for using the remote access function. The POST is
the system to which the camera cables connect directly, and the BASE is the system which is installed at
another site for remote access. Install the BASE software at the remote site after installing the DVR.
POST System Setup
Click the Setup button in the SmartGuard mode, and the following Setup dialog box appears. Move to the
Authority tab, and check the Remote Monitoring box for the user's authorization if you want to access to the
remote POST system from the BASE system.
51

Publicité

loading