Publicité
Les langues disponibles
Les langues disponibles
4.
Click the text field beside User ID, and enter the user ID.
5.
Click the text field beside Password, and enter the user password. Then click the text field beside Confirm
Password, and enter the user password again to confirm the password. Move to No Password, and
check the box when using a User ID without a password.
NOTE: Up to 16 characters maybe used for a user ID, and eight characters for a password.
6.
Clicking the OK button saves the changes and returns to the Setup dialog box. Selecting Cancel exits
the dialog box without saving the changes.
7.
In the Remote tab, move to Connect with the registered password. If this box is checked, the remote
DVR will be connected automatically with registered user ID and password. If there is no registered
password, the login dialog box will appear. The connection fails when an incorrect password is entered.
8.
Move to Auto connect when callback..., and check the box if you want to connect the remote site
automatically when the BASE system receives a callback message. This auto callback connection can
be disconnected automatically if you check the Disconnect after box and set the desired disconnection
time.
9.
Move to Dialup Network, and check the Use modem box when using a modem for remote access, and
then select a modem to use from the drop-down list.
10.
Click the Set up group..., and set up the group management. The BASE system can monitor up to 32
remote DVRs simultaneously. For the effective management of the remote DVRs, the user can register
multiple remote DVRs in one group. Up to 64 groups can be registered.
Move to Group, and set up the group information. Click the Add button to register a new group.
1.
Enter the name of the group to register, and click the OK button.
2.
Move to Camera assignment, and select the target remote site and camera number from the
drop-down list.
3.
Clicking the OK button saves the changes and returns to the Setup dialog box. Selecting Cancel exits
the dialog box without saving the changes.
NOTE: If you want to edit the established group information, click the Edit button after selecting a registered
group from the list. Then, edit the group information. If you want to delete a registered group, click the
Delete button after selecting a registered group from the list.
16-Channel Digital Video Recorder
57
Publicité
