Publicité
Les langues disponibles
Les langues disponibles
User's Manual
BASE System Setup
NOTE: It is suggested that the computer used for the BASE system has at least a 1.5GHz Pentium 4 and 256MB
RAM for proper operation.
SmartBase — Remote Monitoring and Recording Software
NOTE: When selecting the Remote Monitoring for the user's authorization during the POST system setup, you
can access to the remote POST system from the BASE system.
After installing the BASE software on your PC, click the Start button from the task bar. Move the cursor to
Programs, then to IDR Series BASE to open the program list. Select SmartBase.
NOTE: If you do not use the overlay display mode on the SmartBase system, you can move the SmartBase
window at any place on the monitor by dragging the mouse.
Quit: Click the button to quit the system.
Monitor
•
Display Format: Various display formats (single-screen, full-screen, quad, 3+4, 3x3, 2+8, 4x4, 5x5 and
1+32) are provided for convenient user interface. Each format can be selected by clicking the screen
buttons. The camera groups for multi-screen formats are composed of cameras 1 to 32 in order. The
user can select which camera group is displayed by clicking any camera button in a group from
camera buttons.
•
OSD: OSD information including camera description, recording status, and sensor detection can be
displayed on the image. Click the Setup button and move to the System tab in the Setup dialog box.
Check the Show OSD box to display the OSD information.
52
Version: Displays the software version of the POST system currently connected.
Publicité
