Publicité
Les langues disponibles
Les langues disponibles
NOTE: The sound card provides two types of audio input, Microphone and Line-in. Microphone is for an
unamplified source while Line-in is for an amplified source. You must manually select the recording input
type.
5.
Click the Set up zone... button, and a zone setup window appears.
The setup screen is made up of a 30x40 grid. First, click the Draw radio button and select a tool to use from
the drop-down list, and then set up the detection zone on the image. Use the tools as follows:
Point — Place the cursor on the image and click the left mouse button. A single box appears where the
cursor is.
Line — This tool can be used to draw irregular shapes. Place the cursor where you want to start the line. Hold
down the left mouse button and drag the cursor to where you want the end of the line. Release the mouse
button and a group of boxes appears along the line you drew. You can draw lines around shapes by
repeating this process.
Rectangle — Hold down the left mouse button and drag the cursor in any direction. A rectangle appears.
Once the rectangle is the size you want, release the mouse button and the rectangle fills with boxes.
Fill — When using the fill tool, clicking the mouse will fill that area of the image with boxes. If a shape has
been drawn with the line tool, clicking inside will fill the area with boxes. Clicking outside the area will fill the
outer area with boxes. If no shapes have been drawn, the entire screen will fill with boxes.
NOTE: When you select the Erase, you can use the tools as described above to delete boxes.
Move to Sensitivity, and set the motion detection sensitivity (1 to 5) by holding down and dragging the
pointer.
NOTE: he higher the number, the more sensitive it is.
6.
Move to Min. size, and set the minimum number of blocks (1 to 100). If you set the Min. size value to 10,
the DVR will only react to motion when it detects changes (activity) in at least 10 connected blocks
within the selected zone established in step 6.
7.
Move to View Result, and check the box to see detection results. You can check that sensitivity and
minimum size are set correctly using this feature. You can save your changes by clicking the OK button.
Selecting Cancel exits the dialog box without saving the changes.
16-Channel Digital Video Recorder
17
Publicité
