Capture CPT-DVR4132XP Manuel D'utilisation page 120

NOTE: The maximum record image size and quality of pre-alarm recording will be restricted to 320x240 and
Medium regardless of setting values of Rec. image resolution and Rec. image quality in order to maximize
the amount of pre-alarm video to be stored.
18.
Click Advanced Setup... to select an advanced camera setup. In addition to the normal camera setup
established in steps 10 to 17, the DVR provides additional camera configurations for the following
situations: After hour, On alarm, and On Priority alarm.
NOTE: After hour – The DVR follows an advanced setup during the time outside the hours established as the
Work hours. On alarm – The DVR follows an advanced setup during alarm activation. On Priority alarm – The
DVR follows an advanced setup during high-priority alarm activation. High priority alarms are configured in
the sensor/motion detection setup. See the Setting Up Sensors and Setting Up Motion Detection sections for
setting up the priority alarm.
1.
Move to From and To under Work hour, and set the start and end time of working hours by holding down
and dragging the pointer.
NOTE: Work hour set in this menu is applied to the normal camera setup established in steps 10 to 17, and all
hours except the Work hours will be After hour.
2.
Move to After hour, and check the box if you want to use an advanced setup during the hours outside
hours established in Work hour. Then, set the Recording speed, Rec. image resolution and Rec. image
quality by holding down and dragging the pointer. Refer to the steps 10 to 17 for the available values for
each setting.
3.
Move to On alarm, and check the box if you want to use an advanced setup during alarm activation.
Then, set the Rec. image resolution and Rec. image quality by holding down and dragging the pointer.
Refer to the steps 10 to 17 for the available values for each setting.
4.
Move to On Priority alarm, and check the box if you want to use an advanced setup during high-priority
alarm activation. Then, set the Recording speed, Rec. image resolution and Rec. image quality by
holding down and dragging the pointer. Refer to the steps 10 to 17 for the available values for each
setting.
5.
You can save your changes by clicking the OK button. Selecting Cancel exits the Advanced camera
setup dialog box without saving the changes.
NOTE: The configuration of the Advanced camera setup is also set for all cameras when the Same
configuration for all cameras is selected.
16-Channel Digital Video Recorder
13