Publicité
Les langues disponibles
Les langues disponibles
User's Manual
1.6 Click Protocol and click the Add... button.
1.7 Select Microsoft from the Manufacturers and TCP/IP for the Network Protocols. Click the OK button to
save the changes and return to the Network dialog box. In the Network dialog box, click TCP/IP in the list of
network components, and then click the Properties button below.
1.8
Under the IP Address tab, click the Specify an IP address radio button.
Enter the IP address as
"10.10.10.10" and the subnet mask as "255.255.255.0" in the text field beside IP Address and Subnet Mask.
You can save your changes by clicking the OK button. If you select OK, you might need to allow the system
to reboot. Selecting Cancel exits the dialog box without saving the changes.
1.9 Open My computer on the desktop, and select Dial-Up Networking. Then, click Make New Connection.
If Dial-Up Networking is not listed, return to step 1.1.
1.10 Enter "My Network" for the name of the POST DVR you are dialing, and select an installed modem from
the drop-down list. Then, click the Next button.
74
Publicité
