Télécharger Imprimer la page

Capture CPT-DVR4132XP Manuel D'utilisation page 149

Publicité

Les langues disponibles

Les langues disponibles

User's Manual
Image Adjust
Brightness: Changes the brightness of the current image. Click
to make the image darker and click
Zoom: Enlarges or shrinks the current image. To enlarge the image, click
. This button works only in the single-screen mode. You can also enlarge or shrink the image by
rolling the mouse wheel on the image.
NOTE: Make certain that the cameras and monitor are adjusted properly before recording because this
adjustment should not be used to correct improperly recorded video.
NOTE: The recorded video will be displayed on the playback window with 640x480 as default even though
their resolution is 160x120 or 320x240. At this time, the DVR will interpolate the enlarged video automatically.
Utility Buttons
Full Screen: Clikc the Full Screen button to display the recorded images in full-screen mode during
playback. To exit from full-screen mode, click the left mouse button anywhere on the screen.
Local: Click the Local button to load recorded data from the local hard disk drive.
Backup: Click the Backup button to load backup data from the extra backup device (e.g. DVD-RAM,
CD-R(W), USB hard disk drive).
Setup: Click the Setup button to set up the SmartSearch. See the SmartSearch Environment Setup
section.
Click the
Remote:
The following
Remote Site
monitoring is (are) displayed in the list box.
1.
Connecting a remote site...
2.
Click the site where you want to connect in the list box, and then click the Con. button.
3.
Double click the site where you want to connect in the list box. Or, hit the enter key after entering the site
name or address in the text field located under Select a site. (Quick Search)
4.
Disconnecting a remote site...
5.
Click the site where you want to disconnect in the list box, and then click the
42
button to load recorded data from the remote DVR via a modem or LAN.
Remote
dialog box appears, and the remote site(s) you registered for remote
to set the brightness to the default setting.
to make the image brighter, click
. To shrink the image, click
button.
Discon.

Publicité

loading