Publicité
Les langues disponibles
Les langues disponibles
6.
Click the Initialize... button to initialize the backup space. The backup drive should be initialized before
backing up.
7.
Drive column displays the drive location. Total Size column displays the total size of the installed backup
drive, and Available Banks displays the number of available banks for backup.
Allocated Banks will display the number of allocated banks for backup.
8.
Move to Use column, and check the box beside the drive to select it as a backup drive. Multiple drives
can be selected.
NOTE: You can not select the drive which has no("0") allocated bank.
9.
Move to New Banks for Selected Drive, and set the number of banks to be used for backup by using the
arrow buttons. New Banks column will display the number of banks to add.
10.
Click the Format button to start initializing the backup space of the selected drive.
NOTE: Any bank contents stored on the drive will be deleted when you initialize the backup drive.
11.
Move to CD Burner, and click the ... button. Register the program location to use.
CD Burner
Click the CD Burner button in the SmartBackup dialog box to initiate the CD burning program registered
during SmartBackup setup. Refer to the SmartSearch – Run CD Burner section for the instructions on CD
burning.
NOTE: CD burning is not available during the automatic backup.
Target files for CD burning
•
Image files saved in SmartSearch mode.
•
Video files saved in SmartSearch mode.
•
MiniBank files saved in SmartSearch mode.
•
Whole ibbank directory on the drive used for backup
NOTE: The size of the ibbank directory should be smaller than the capacity of the CD drive. When using the
650MB CDR or CDRW media, you must not exceed two backup banks.
16-Channel Digital Video Recorder
After initializing,
49
Publicité
