Capture CPT-DVR4132XP Manuel D'utilisation page 116

4.
Move to Spot sequence dwell, and set the sequence dwell time for the Spot monitor by holding down
and dragging the pointer. You can set the dwell time from 1 to 10 seconds. If you set the value to 3
seconds, the camera display will sequence every three seconds on the Spot monitor. (4132 model only)
5.
Click the More... button, and set up the spot sequence in detail.
6.
Move to Spot, and click the Spot monitor icon to connect. No (0), one, four or eight monitors can be
connected according to the DVR specification.
7.
Move to Spot Sequence, and select the camera number for each number (Camera 1 to 16 for Spot 1 to
4 and Camera 17 to 32 for Spot 5 to 8) to sequence or Not Used from a drop-down list.
8.
Move to Hold spot during single-screen mode, and check the box if you do not want the cameras
sequence on the Spot monitor while the main monitor is set to the single-screen display mode.
9.
Move to Include event display, and check the box if you want to display the event-detected video
during spot sequence.
10.
Move to Show video loss, and check the box if you want to show the video loss image during spot
sequence.
11.
Move to Sequence dwell, and set the sequence dwell time (from 1 to 10 seconds) for the main monitor
by holding down and dragging the pointer. If you set the value to 3 seconds for the Sequence dwell, the
camera display will sequence every three seconds on the Main monitor.
12.
Move to Event monitoring dwell, and set the monitoring dwell time (from 0 to 10 seconds) for the
event-driven image by holding down and dragging the pointer. If you set the value to 3 seconds for the
Event monitoring dwell, the camera with an event will display in the one-screen mode for three seconds
on the main monitor any time an event (alarm input or motion detection) occurs. Set the value to 0
seconds if you do not want the event-driven camera to be displayed in the one-screen mode.
13.
Move to Screen saver dwell, and set the screen saver dwell time (from 0 to 180 minutes) for the display
image. The screen saver will be activated if there is no keyboard or mouse operation during the preset
dwell time.
14.
Move to Auto Deletion, and check the box if you want to delete the video recorded earlier than
user-defined period. When checking the Auto deletion box, move to Period and set the period to keep
the recorded video. e.g. If you check the Auto deletion box, and set 30 days in the Period box, the DVR
will automatically delete the video which is older than 30 days from the current day.
15.
Move to Show OSD, and check the box if you want to display OSD information on the image. OSD
information includes camera title, recording mode and recording status.
NOTE: An R indicates the target camera is in the Time-lapse recording schedule mode. An S indicates it is in
the Event-driven recording mode. An RS indicates it is in the Time & Event recording mode. An R located at
the bottom-right corner indicates the DVR is recording video, and the blink rate of the R relates to the
recording speed.
16-Channel Digital Video Recorder
9