Publicité
Les langues disponibles
Les langues disponibles
User's Manual
8.
Move to Show results, and check the box to show detection results on the monitoring image.
9.
Move to Camera association, and click the camera icon to associate it with the camera selected step 1. If
motion is detected by one camera, other cameras can be associated with it so that video will also be
recorded from the associated cameras.
10.
Move to Alarm association, and click the alarm icon to associate it with a selected sensor. The alarm will
go off when an associated sensor is activated.
Setting Up the Anti-Terrorism
1.
Click the Camera icon.
2.
Move to Enable, and check the box to enable Anti-Terrorism function for the selected camera. If the
anti-terrorism is selected, the DVR will detect the changes on the image compared to the reference
image during the preset dwell time.
3.
Move to High priority, and check the box to give high priority to the target camera. The DVR will follow
the advanced camera setup when the target camera detects changes on the image. See the Setting
Up Cameras for configuring advanced camera setup.
4.
Move to Record Audio, and check the box to record audio when a selected camera detects changes
on the image. Recording audio will be activated when the DVR is recording video. When checking the
Record Audio box, click the Set up Audio... button. Select an audio input type from Microphone or
Line-in, and set its balance and volume in the Recording Control dialog box.
NOTE: The sound card provides two types of audio input, Microphone and Line-in. Microphone is for an
unamplified source while Line-in is for an amplified source. You must manually select the recording input
type.
18
Publicité
