Publicité
Les langues disponibles
Les langues disponibles
Auto Sequencing: When this button is clicked, the SmartBase sequences the cameras in order.
Whenever you click the button, it toggles between On and Off. The switching interval can be set
during the system setup.
Setup: When this button is clicked, a dialog box appears. The dialog box has four tabs. See the
following System and Remote Monitoring Setup section.
Accessing SmartSearch: Click this button to run the SmartSearch. If the SmartBase is connected
to the remote site, the SmartSearch will log in the same site automatically with the same login ID
and password.
System and Remote Monitoring Setup
Click the Setup button on the main GUI of SmartBase.
1.
Click the Local radio button and then click the Set up... button.
2.
Move to the System tab.
3.
Move to Show VLoss Dialog, and check the box if you want to show the video loss acknowledge dialog
when the video loss is detected.
4.
Move to verify password, and check the boxes to use a password before shutdown, before stop
recording, before setup, and/or before search.
NOTE: Refer to the SmartGuard section for setting up other menus.
16-Channel Digital Video Recorder
55
Publicité
