Spengler CARDIOMATE PC Manuel Utilisateur page 98

5.3.3 Lead off Alarm
During the acquisition process, if the lead connection is unstable or dropped, the software will
prompt the alarm of lead off. Please check the loose electrode or patient cable according to
the information prompted, and reconnect the electrode or patient cable.
5.3.4 Reanalysis
After the acquisition, if there is a large difference between the measurement parameters pro-
vided by the system and the actual waveform, users can click the «Reanalysis» to enter the
reanalysis interface, as shown below.
The reanalysis interface shows ECG features, average template of each lead, analysis interpre-
tation, etc., which can be used for re-analysis of current ECG records.
Modify parameters: users can manually input parameters or move the location line of the ave-
rage template to modify the parameters.
Switch display channel: users can click the lead name to switch to display the average template
of the corresponding lead.
Modify conclusion:
 Add: directly input the conclusion in the conclusion input box manually or select the conclu-
sion in the analysis result index, and click [Add] to add the conclusion.
 Clear: clear the conclusion information.
 Save as template: save the current conclusion as user-defined template.
 Edit template:
 Import template: import user-defined templates in bulk.
 Update: update the selected template content.
 Save as template: save the edited template as a new template.
 Delete: delete the selected template.
 Close: close the edit template box.
5.3.5 File Export and Print
5.3.5.1Manual Print and Export
After sampling ECG data, long press ECG waveform replay area to display file export and re-
port print dialog box, as shown below.
98
www.spengler.fr