Publicité
Les langues disponibles
Les langues disponibles
The patient information interface includes the following contents:
Name
Patient Information
Worklist (Optional)
HL7
(Optional)
OK
Cancel
5.3.2 ECG Acquisition
1. Start sampling
Click 【OK】 in the patient interface to start sampling ECG data, or click 【Sampling】 in the
toolbar to directly sample ECG data.
Presampling: Set the presampling time of "Settings"- > "Record Mode" to the non close
state. ECG data were not recorded in this setup.
After the set pre acquisition time, the system starts to record ECG data, and the recording
time of the main interface starts to count.
In the acquisition process, click 【Sampling】to clear the recording time and restart recor-
ding ECG data for the current patient.
It is strongly recommended that when there is strong interference in the current acquisition
process, click [Sampling] again to eliminate the interference after the interference disap-
pears, so as to obtain high-quality ECG waveform and reduce misdiagnosis.
2. Stop Sampling
Manual stop: click 【Stop】 to end the current acquisition. When the recording time is less
than 10s, the software does not save the data.
Auto stop: if you select «auto» in «Settings» - >»Record Mode» - >»Record Mode», the ECG
acquisition and analysis software for Android Tablet will automatically stop and save the file
after the record reaches the set sampling time.
You can input patient ID, name, age, birthday and gender.
Enable Worklist in system settings to download patient information from the specified
server.
Click 【Worklist】 to enter the Worklist list interface, click 【Update】 on the list page
to enter the update interface, and query the patient information in the server accord-
ing to the selected examination date. Click patient information in the acquired list to
acquire ECG data with this information.
System setting - hospital information, turn on the HL7 switch, enter the ID in the pa-
tient information interface, click 【HL7】, and automatically query the patient informa-
tion of the corresponding ID in the corresponding server.
Save the current input patient information and enter the main interface to start acquir-
ing ECG waveform.
Save the current input patient information and enter the main interface to start sam-
pling.
Do not save the current input information and return to the main interface.
www.spengler.fr
Function
97
Publicité
