Publicité
Les langues disponibles
Les langues disponibles
4.2.3 Right Click Function Introduction
In the replay interface, the right click displays the following functions: export, ruler, parallel
ruler, aVR, aVL leads correction, magnifier, print and upload (optional), as shown in the
following figure:
Name
Export
Ruler
Parallel ruler
aVR, aVL leads correction
Magnifier
Print
Upload (optional)
The export of data files and image reports. See the export settings in 4.5 for details.
Measure the waveform width and amplitude:
Press and hold the left mouse button at the starting point where the waveform
needs to be measured, drag the mouse to the measuring ending point, release the
mouse, and the ruler will display the time difference and amplitude difference be-
tween the two positions.
You can check the regularity of heart beat rhythm:
Right click to select "parallel ruler", click the left mouse button on the waveform
of the main interface and drag the mouse to show a series of parallel lines. The
software calculates the interval time difference and heart rate value through the
distance between the parallel lines.
ECG data of related channels of left and right limb leads can be exchanged:
Right click to select "aVR, aVL leads correction" in the main interface, select "yes"
to continue aVR, aVL leads correction, and select "no" to give up the operation.
Amplification of ECG waveform:
Right click to select "magnifier", press and hold the left mouse button at any po-
sition of the waveform, and drag the mouse to enlarge the ECG waveform at the
mouse position.
Right click to select "print", and directly print the ECG report in the default print
format.
If the preview function is on, select Print to display the print preview interface.
According to the preset upload setting, upload the currently replayed patient re-
cord report to the corresponding server.
www.spengler.fr
Function
85
Publicité
