Publicité
Les langues disponibles
Les langues disponibles
Nom
ECG Analysis Settings
FTP settings
(optional)
DICOM settings
(Optional)
Worklist settings
(Optional)
HL7 settings
(optional)
Upload settings
(optional)
Path settings
Miscellaneous settings
1) Enable auto-analysis: enable this item, the software can automatically analyze the
ECG data collected for more than 10s and provide interpretation.
2) Enable auto-classify: enable this item, the ECG data interpretation of automatic
analysis will be classified.
3) Analyze 10s ECG only: enable this item, only the last 10s ECG data collected will be
analyzed.
4) QTc duration correction using formula: calculation method of QTc, including two
formulas of Bazett and Friderica.
Includes local FTP server setup and FTP client setup
FTP server can receive uploaded file types including EM-XML, FDA-XML, SCP, BKG,
DICOM.
According to the corresponding information set by the DICOM server, there are three
formats of the uploaded DICOM file which are LEADS_12_ECG, GENERAL_ECG ENCAP-
SULETED_PDF_ECG
1) Worklist is used for patient information query: if this function is enabled, the worklist
Update button will be displayed in the patient information interface; if this item is not
checked, the worklist Update button will not be displayed in the patient information
interface.
2) Worklist server setup: set corresponding IP / server port / server aetitle / local AE
title information according to worklist server.
3) Worklist update interval in automatic mode: update interval time in automatic update
mode, and in manual update mode this button is gray.
4) Update mode: auto, manual
1) HL7 is used for patient information query: check this item to open the HL7 query
function. Enter the ID in the patient information interface and click 【Query】 to query
the corresponding patient information on the HL7 server according to the ID. If this item
is not checked, the HL7 query function will be closed.
2) HL7 server setup: set the corresponding IP / server port according to HL7 server.
1) Upload mode: auto and manual.
2) Upload method: FTP and DICOM.
3) Upload image file type: PDF, JPEG, BMP, close. If it is selected as close, the image file
will not be uploaded.
4)Upload data file format: FDA-XML, EM-XML, SCP, BKG, DICOM, close. Do not upload
data files when you choose to close.
Set the path to save the software data file.
1) Enable beep for heart rate: enable this item, the heart beat sound will be generated
when ECG waveform is sampled.
2) Lead off alarm: enable this item, when acquire ECG data, there will be a prompt tone
when the electrode leads off.
3) Demo mode: check this item, when ECG data is acquired, the main interface will
display 84bpm demonstration ECG waveform, and the interface will display the word
"demo". In this mode, real-time ECG data will not be acquired.
4) 6 leads mode: check this item, the acquisition interface only displays the limb lead
waveform, and the data file and report only save the limb lead data. In this mode, the
display format and report format cannot be modified. The display format only sup-
ports 6X1 format, and the report only supports horizontal 6X1 format.
5) Delete imported files: check this box to delete the file in the original disk path after
import.
6) System password: you can change the administrator password. Click 【Change】and
enter a new password then click 【OK】 to complete the password modification.
www.spengler.fr
Fonction
93
Publicité
