Publicité
Les langues disponibles
Les langues disponibles
5.5.2 Record Mode
The machine number, record mode and related exported information can be set in this interface,
as shown in the following figure.
Name
Machine Number
Record Mode
Auto Record Duration
Presampling
Export Mode
Data File Format
Image File Type
Image File Preview
5.5.3 Rhythm Lead
Single rhythm lead and three rhythm leads can be set in twelve lead mode in rhythm lead setting
interface, as shown below.
Single rhythm lead: one of the twelve leads is selected as rhythm lead. The single rhythm lead is
1R lead in the format of 3 × 4 + 1R or 6 × 2 + 1R.
Represents the unique number of the software, which can be input in English, numbers
and special symbols. The machine number can be reflected in the report name.
Manual: after sampling, the user needs to manually click 【Stop】 to end the acquisition.
Auto: after the start of sampling, when the time reaches the preset sampling time, the
software automatically ends the acquisition.
It can be entered manually to control the sampling duration under the automatic
recording mode; this setting item is only for the automatic record mode.
The pre-sampling time can be 3 seconds, 5 seconds and 10 seconds. It is off by default.
Auto: after ECG data acquisition, the software automatically exports the ECG data file to
the corresponding path.
Manual: manual data export is required.
Set the default export data file type.
Sets the default export image file type.
Turn on this item, and the image report will be opened automatically after the image
report is exported.
www.spengler.fr
Function
102
Publicité
