Frama EcoMail Mode D'emploi page 56

5.9.4 Setting screen contrast
The screen contrast can be adjusted to the
ambient light conditions as follows:
• Press the «SET CONTRAST» key.
→ Menu field for contrast settings.
• Press the «+» and «-» keys as required.
→ The contrast increases or decreases.
The setting is displayed in steps of 25
units.
• Confirm the setting with the «OK'» key
or abort using the «CE» key.
5.9.5 Key signal switch-on, switch-
off
The acoustic signal you hear when you
press a key can be switched on or off as
follows:
• Press the «SIGNAL ON» or the «SIGNAL
OFF» key.
→ The key field indicates the current sta-
te.
5.9.6 Setting the printed date
For Mailmax franking systems, the date and
time are automatically updated each time
56
the system is switched on. To pre-frank
bulk mail items, for example, you can set
the date in advance as follows (sequence is:
day–month–year):
• Press the «CLOCK DATE» key.
→ The date appears.
• Set the date desired using the keypad
(you can correct entry errors with the
«CE» key). Confirm with the «OK» key.
→ The selected date is set and displayed
in the Info/Setup menu as well as in
the working menu.
Important: If you press the «CE» key twice
after you have entered the date, the system
returns to the Info/Setup menu with the
previously set date.
Don't forget to change back to the cur-
rent date after you have finished using
this changed date!
5.9.7 Setting the time
The time can be adjusted as follows (e.g.
for summer/winter time changeover):
• Press the «CLOCK TIME» key.
→ The time appears.
• Set the time desired using the keypad
(you can correct entry errors with the
«CE« key). Confirm with the «OK» key.
→ The selected time is set and displayed
in the Info/Setup menu.
Important: If you press the «CE» key twice
after you have entered the time, the system
returns to the Info/Setup menu with the
previously set time.
5.9.8 Parking the print head
If the franking system will not be used for a
prolonged period (e.g. a holiday close -
down), we recommend parking the print
head before the system is switched off. This
protects it from any dust contamination.
Procedure:
Press the «PARK POSITION» key.
The touch-screen goes dark.
Wait approx. 3–5 seconds before switching
off the franking system at the mains switch
(3).
Important! The print head must be par-
ked every time before relocating the
franking system. Also observe the fol-
lowing instructions:
• Keep the franking system horizontal
while in transit (do not tilt!).
• If you plan to relocate the franking
system to alternative premises, plea-
se contact your local Frama service
organisation and the appropriate
postal authority.
The franking system performs an automatic
cleaning sequence whenever it is switched
on with the print head parked («Cleaning
process» appears in the display), and then
requests a test print.
5.9.9 Checking the print image
quality
Proper print head operation (all pixels prin-
table) may be checked as follows:
• Press the «PRINT TEST» key.
→ Display «Please make a test print».
• «Frank» an empty envelope or card.
→ The date, «Test print» and the test
print image are printed (see illustration