Gigant Achsen Manuel D'atelier page 40

Masquer les pouces Voir aussi pour Achsen:
Table des Matières

Publicité

Schrauben Sie den Montage-
dorn auf die Achse. Montage-
dorn Bild 4001).
!
ACHTUNG
Links-/Rechtsgewinde
Ziehen den kompletten Naben-
satz zusammen mit der Brems-
scheibe über den Montagedorn
vom Achsschenkel. (Bild
4003).
7
Treiben Sie die Radbolzen aus
der Nabe/Bremsscheibeneinheit
(Bild 4004).
Trennen Sie Bremsscheibe und
Radnabensatz.
Säubern Sie die Anlage-
flächen der Radnabe zur
Bremsscheibe.
Legen Sie die neue Brems-
scheibe auf die Radnabe und
stecken die Radbolzen durch
die Bremsscheibe soweit wie
möglich in die Radnabe.
Treiben Sie die Bolzen mit
einem Hammer vorsichtig in
ihre Endlage.
40
Screw the mounting mandrel
onto the axle. (Mounting
mandrel fig. 4001).
ATTENTION
Left-hand thread/
right-hand thread
Pull the complete hub set,
together with the brake disc, off
of the axle schank over the
mounting mandrel.
(fig. 4003).
Force the wheel bolts out of the
removed hub and brake disc
unit (fig. 4004).
Separate brake disc and wheel
hub set.
Clean the bearing surfaces of
the wheel hub to the brake disc.
Place the new brake disc on the
wheel hub and insert the wheel
bolts through the brake disc as
far as possible into the wheel
hub. Carefully force the bolts
into their end position with a
hammer.
Vissez le mandrin de montage
sur l'essieu. (mandrin de
montage figure 4001).
ATTENTION
Pas gauche /droit
Montagedorn
mounting mandrel
mandrin de montage
Achsen, axles, essieu
9,0t 22,5" - 10,0t 22,5"
10,5t 17,5"
12,0t 17,5"
12,0t 22,5"
Tirez le moyeu complet sur le
mandrin de montage avec le
disque du frein pour le retirer de
l'essieu. (figure 4003).
Chassez les goujons de roue
hors des moyeux de roue
déposés et du frein à disques
(figure 4004).
Séparez le disque de frein des
moyeux.
Nettoyez les surfaces du moyeu
qui sont en appui avec le disque
du frein.
Posez le nouveau disque sur le
moyeu et à travers le disque de
frein insérez les goujons de
roue aussi profondément que
possible dans le moyeu. Avec
un marteau, poussez
doucement les boulons jusqu'en
butée.
Bild, fig., figure 4001
ArtikelNr, articleNo,
n° de référence
9297 005
9297 006
Bild, fig., figure 4002
Bild, fig., figure 4003
Bild, fig., figure 4004

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

AxlesEssieux

Table des Matières