Warnings - Nice Ten TN2010 Instructions Et Recommandations Pour L'installateur

1) Warnings

Important instructions for installation safety
!
Incorrect installation may cause serious injury.
Carefully follow all installation instructions.
This instruction manual contains important information regarding the
safety of installation; read all instructions before proceeding with installa-
tion. Keep this manual in a safe place for future consultation.
In consideration of the risks that may arise during installation and use of
TEN, ensure that the installation procedure is completed in full obser-
vance of application legislation, standards and regulations. This chapter
provides general warnings; other important warnings are given in chap-
ters "3.1 Preliminary checks"; "5 Testing and commissioning".
!
According to the most recent European legislation, the
automation of a door or gate is subject to the specifications
of the Machinery directive 98/37/CE and more specifically to
the standards: EN 13241-1 (harmonised standard); EN 12445;
EN 12453 and EN 12635, which enable declaration of confor-
mity with the machinery directive.
Further information and guidelines on the risk assessment, useful when
drawing up the Technical Documentation are available on the site
"www.niceforyou.com". This manual is aimed exclusively at technical
personnel qualified for installation. With the exception of the specifica-
tions attached, to be detached by the installer "Instructions and warn-
ings for the TEN gearmotor user", no other information in this documen-
tation is intended for the final user.
• Use of TEN other than that envisaged in these instructions is strictly
prohibited; improper use can lead to hazards, physical injury or dam-
age.
• Before starting installation, an assessment of the associated risks must
be made, including a list of the essential safety requirements as envis-
aged in Appendix I of the Machinery Directive, specifying the relative
solutions adopted. Note that the risk assessment is one of the docu-
ments included in the automation Technical documentation.
• Check whether other devices or materials are required to complete
automation with TEN, evaluating the specific application and associat-
ed risks; for example considering the risks of impact, crushing, shear-
ing, dragging and other hazards in general.
• Do not make any modifications to any part unless envisaged in these
instructions; this type of operation can only cause malfunctions. NICE
declines all liability for damage resulting from modified products.
• During installation and use, take care to prevent solid parts or liquids
from entering into the control unit and other open devices; if necessary
contact the NICE assistance service; use of TEN in these situations
can constitute a hazard.
• The automation cannot be used before commissioning the installation
as specified in the chapter: "5 Testing and Commissioning".
• The TEN product packaging material must be disposed of in full obser-
vance of current local legislation governing waste disposal.
• In the case of faults not remediable using the information in this man-
ual, contact the NICE assistance service.
• If any circuit breakers trip or fuses blow, locate and eliminate the fault
before resetting.
• Before accessing the internal terminals under the TEN cover, discon-
nect all power circuits; if the disconnect device is not in a visible loca-
tion, affix a notice: "WARNING: MAINTENANCE IN PROGRESS".
Special warnings regarding the suitability of use of this product in rela-
tion to the "Machinery" Directive 98/37/EC (ex 89/392/EEC):
• This product is issued onto the market as a "machine component" and
is therefore constructed for incorporation in a machine or to be assem-
bled with other machinery to constitute a "machine" in accordance
with the Directive 98/37 CE only in combination with the other com-
ponents and according to the methods as described in this instruction
manual. As envisaged in the directive 98/37/EC, start-up of the prod-
uct specified above is not admitted unless the manufacturer of the
machine, in which the product is incorporated, has identified and
declared the product as conforming to directive 98/37/EC.
Special warnings regarding the suitability of use of this product in rela-
tion to the "Low Voltage" Directive 73/23/EEC and subsequent amend-
ment 93/68/EEC.
• This product complies with the requirements of the "Low Voltage"
Directive if used for the application and in the configurations envisaged
in this instruction manual and in combination with the articles present
in the catalogue produced by Nice S.p.a. Requirements may not be
guaranteed if the product is used in configurations or with other prod-
ucts not envisaged; use of the product in these conditions is strictly
prohibited unless the personnel assigned for installation have verified
compliance with the provisions of the directive.
Special warnings regarding the suitability of use of this product in rela-
tion to the "Electromagnetic Compatibility" Directive 89/336/EEC and
subsequent amendments 92/31/EEC and 93/68/EEC.
• This product has undergone testing for electromagnetic compatibility
in the most critical conditions of use, in the configurations envisaged
in this instruction manual and in combination with the articles present
in the product catalogue of Nice S.p.a. Electromagnetic compatibility
may not be guaranteed if the product is used in configurations or with
other products not envisaged; use of the product in these conditions
is strictly prohibited unless the personnel assigned for installation have
verified compliance with the provisions of the directive.
GB
3