Publicité
52
es (grooves finished on the work piece itself).
•
Use only saw blades for which the maximum speed
is lower than the maximum spindle speed of the ta-
ble saw and which are suitable for the material you
intend to cut.
•
Always use the transporting means for the transport
of the electrical power tool. Never use the protective
devices for handling and transporting the device.
•
Make sure that the upper part of the saw blade is
covered; e.g. by the protective device.
•
Warning! During operation this electrical power tool
produces an electromagnetic field which can in-
fluence active or passive medical implants under
certain conditions. In order to avoid the risk of se-
rious or fatal injuries, we recommend persons with
medical implants to consult with their doctor and the
manufacturer of the medical implant before operat-
ing the electrical power tool.
SAFETY INFORMATION FOR HANDLING SAW BLADES
•
Operate insertion tools only when you know how to
handle them correctly.
•
Always consider the maximum speed. The maximum
speed indicated on the power tool may not be ex-
ceeded. Observe the speed range (if specified).
•
Do not use insertion tools with cracks.
•
Immediately take ruptured insertion tools out of ser-
vice; simply repairing them is not admissible.
•
Clean the clamping surfaces of dirt, fat, oil and wa-
ter.
•
Always handle insertion tools with care. If possible,
keep them in their original packing or in a special
container. Wear protective gloves in order to improve
your grip and to reduce the risk of personal injuries.
•
Before operating the insertion tool, ensure that all
protective devices are attached properly.
•
Before operation also make sure that the insertion
tool you intend to use meets the technical require-
ments for electrical power tools.
•
Use the provided saw blade only for cutting wood
and never for cutting metals.
Publicité
