Publicité
48
•
You will work better and safer within the indicated
power range.
•
Do not use inefficient power tools for heavy work.
•
Do not use the power tool for any purpose other than
that for which it is intended.
•
E.g. do not use a portable circular saw to cut tree
branches or logs.
•
Do not wear loose clothes or jewelry; they could be
caught by moving parts.
•
When working outdoors, it is recommended to wear
non-slip shoes.
•
If you have long hair, wear a hair net.
•
Wear safety glasses.
•
Wear a breathing mask for dust-generating works.
•
In the case that connections for dust suction and
reception are available please ensure that they are
connected and can be used properly.
•
Do not use the cable to remove the plug from the
socket. Protect the cable from heat, oil and sharp
edges.
•
Use clamping devices or a vice to fix the work piece.
Thus it will be held more securely than in your hand.
•
Ensure that you have a stable standing position and
keep your balance at all times.
•
Keep the cutting tool sharp and clean, in order to
make it work better and safer.
•
Follow the instructions regarding lubrication and tool
change.
•
Check the power tool's connection line regularly and
in case of damage have it replaced by an acknowl-
edged expert..
•
Check the extension cables regularly and replace
them when they are damaged.
•
Keep the handles dry, clean and free from oil and
fat.
•
Be sure that the device is not in use , before main-
tenance and while changing tools like saw blades,
drills or any kind of machine tools.
•
Before turning the machine on, make sure that all
keys and adjustment tools have been removed.
•
Make sure that the switch is turned off when plug-
ging the plug in the socket.
•
For outdoor work, use only extension cables which
are approved for this purpose.
•
Always pay attention and take the utmost care when
working with an electric power tool. Do not use the
power tool when you are not concentrated.
•
Before further using the power tool, protective de-
vices and other parts have to be checked carefully in
order to make sure that they function perfectly and
properly.
•
Check to see if all movable parts function properly
and that they do not jam and make sure that no parts
are damaged. All parts have to be mounted properly
and have to comply with all conditions in order to
ensure perfect operation of the power tool.
•
Damaged protective devices and parts have to be re-
paired or replaced as intended by an acknowledged
specialized workshop, if not specified otherwise in
the operating instructions.
•
Damaged switches have to be replaced in a customer
Publicité
