iKarus ECO8 Notice De Montage page 52

2x 67533 Tie rod M2x72 mm
4x 67565 Ballend, long
2x 67603 M2x8 mm LH Screw
Ball
2x 67576
2x 67582 M2 mm Nut
1x 67531
Tie rod M2x52 mm
2x 67565
Ballend, large
1x 67603
M2x8 mm LH Screw
1x 67576
Ball
1x 67582
M2 mm Nut
67582
67576
12 mm
17 mm
View from the top.
67582
67576
12 mm
17 mm
View from the top.
67603
View from the front.
17 mm
The rods length may vary
according to the servo used.
In neutral position the
swashplate should be 17 mm
above the upper bearing
plate.
Make sure that both rods have the same length and the
swashplate is exactly parallel to the upper bearing plate.
Possible difficulties may arise from the servo mounting.
Therefore please make sure that you mount both servos in the
same way. Either you centralise them in the main frame or they
may rest against the upper or lower bracket.
The more straight the rods are the better steering response you
will obtain.
67603
Make sure that the rod has the same length and the
swashplate is exactly parallel to the upper bearing plate.
Possible difficulties may arise from the servo mounting.
Therefore please make sure that you mount the servos in
the same way. Either you centralise them in the main
frame or they may rest against the upper or lower
bracket. The more straight the rods are the better
steering response you will obtain.
Shorten the 72 mm rod
down to 52 mm.
67565
67531
67565
67565
67531
77 mm
67565
abt.
77 mm