Publicité
Les langues disponibles
Les langues disponibles
Make sure that all servos are in
neutral position.
Use the rubber servo grommets
to prevent damage from vibration.
Attention: Never turn the servos
manually. The gear unit of the
servos is not constructed for this
kind of actions.
1x 67513 Tailrotor snake
12 mm
Carefully select the components of your r/c equipment in view of quality and weight. Keep in
mind:
Saving 1 g of weight gives you 1 s more flight time!
Using unsuitable components can cause serious damage to helicopter!
If you have the choice, choose the more sophisticated equipment.
Connect the components as suggested by the manufacturer.
Use the rubber servo grommets to prevent damage from vibration.
Use the installation material provided with the servos.
Make sure that all servos are in neutral position.
In order to clarify the general layout
we stripped the drawing.
Follow the instructions very carefully. The rod lengths had
been verified by experienced flyers and should work for
most cases. Customers having experience with helicopters
should also follow the instructions in order to find a basic
adjustment.
67513
Bowden wire
casing
Steel wire
Tailrotor Pitch lever,
bottom view.
You may bore it
open, because the
steel wire has to get
passed through the
hole with casing.
Cover
Publicité
