Publicité
Les langues disponibles
Les langues disponibles
1x
67579
Motor (not included in
Kit No.: 67100), or
1x 8013019 Brushless motor
(not included in the Kit)
2x
67605
M3x8 mm CH Screw
2x
67631
Washer 3 mm
*)
Please keep in mind:
You have to use di erent pinions
regarding the used motor or the
number of used battery cells. (See
page
28
and
the
ones).Follow
the
instructions of the motor and keep
close to the described features of the
motor. bzw.
Gear meshing is a rather sensitive subject.
Wrong adjustments cause high friction and
unnecessary wear and tear whereas the
correct adjustment is very simple.
Loosen the motor screws.
Put an unused part bag between pinion and
main gear.
Move the motor with the pinion against the
main gear and tighten the screws.
Remove the plastic bag.
Adjust the meshing in the same way at the
taildrive gear.
following
operating
Bottom view
Plastic Bag
Publicité
