iKarus ECO8 Notice De Montage page 41

1x 67610 Flybar Seesaw
2x 67608 Seesaw Lever
1x 67609 Flybar
2x 67589 Paddle
4x 67561 M2x6 mm LH Screw
2x 67582 M2 mm Nut
Look from the side: seesaw,
arms und paddle have to in
line to each other.
Do not tighten now!
123 mm
Mark 123 mm as shown. Use the scale at the right side.
Use high performance lubricant in the area of the
shaft and the spacer if necessary.
Line up with the mark
on both sides.
123 mm
Make sure that the flybar and the seesaw move
without friction.
Fasten the M2 x 6 mm screw when
the adjustment have been done.
10 mm
20 mm
123 mm